Angle Milling Vise

Angle Milling Vise

Angle milling vise, 6"

A truly heavy-duty angle vise for milling or other demanding machine applications. Solid iron construction with stress relieved design.

• Made from FC25 fine-grain, cast iron
• Trapezoidal-thread lead screw with large cast-iron crank handle
• Oversize angle hinge eliminates horizontal play
• Base and bed parallel to 0.004˝ (0.1 mm)
• Jaw surfaces square to 0.002˝ (0.05 mm)
• Less than 0.004˝ (0.1 mm) jaw deflection at 4,000 pounds clamping pressure
• 11/16˝ Keyway in angle base and swivel base
• Vise can be raised up to 45° and securely locked in place for rapid angular setups without the use of blocks or wedges
• Knurled socket-head bolts with lock washers on side plates for quick, secure locking
• Finely etched hinge boss is graduated in 1° increments from 0 to 45°
• Removable swivel base is graduated in 1° increments a full 360°
• Replaceable, smooth jaw plates constructed of hardened and ground tool steel
• Lugs in both vise and swivel base for mounting to machine table
• Vise can be used with ot without swivel base
• LIFETIME GUARANTEE